MEAS462 - Introduction to MIL-STD-461 CS Measurements

This course is the third in a four course series on MIL-STD-461 measurements. MIL-STD-461 concerns itself with four different types of measurements, conducted emissions (CE), radiated emissions (RE), conducted susceptibility (CS), and radiated susceptibility (RS). The courses in this series are thus naturally:

MEAS460 - Introduction to MIL-STD-461 CE Measurements
MEAS461 - Introduction to MIL-STD-461 RE Measurements
MEAS462 - Introduction to MIL-STD-461 CS Measurements
MEAS463 - Introduction to MIL-STD-461 RS Measurements

This course is concerned with conducted susceptibility measurements. Although this course is concerned about MIL-STD-461 measurements, the techniques used are applicable to commercial standards as well.

The course outline is as follows:

Introduction
Review
- The Basic Setup
- The Current Probe
General Requirements
- Susceptibility Monitoring
- Thresholds of Susceptibility
- Frequency Scanning
Detailed Requirements
- CS101 - Conducted Susceptibility, Power Leads, 30 Hz to 150 kHz
- CS103 - Conducted Susceptibility, Antenna Port, Intermodulation, 15 kHz to 10 GHz
- CS104 - Conducted Susceptibility, Antenna Port, Rejection of Undesired Signals, 30 Hz to 20 GHz
- CS105 - Conducted Susceptibility, Antenna Port, Cross-Modulation, 30 Hz to 20 GHz
- CS109 - Conducted Susceptibility, Structure Current, 60 Hz to 100 kHz
- CS114 - Conducted Susceptibility, Bulk Cable Injection, 10 kHz to 200 MHz
- CS115 - Conducted Susceptibility, Bulk Cable Injection, Impulse Excitation
- CS116 - Conducted Susceptibility, Damped Sinusoidal Transients, Cables and Power Leads, 10 kHz to 100 MHz
Summary

To register for this course, you must have a student account.

If you have a student account select "Register for Course" and if you do not have a student account select "Create Student Account" and return to this page to register for the course

Create Student Account

MEAS462 - Introduction to MIL-STD-461 CS Measurements

Twitter Updates