The ASQ CCT Exam Preparation Program
The ASQ Certified Calibration Technician (CCT) exam preparation program covers the body of knowledge (BOK) required for passing the exam.
The following courses are part of the program:
I. General Metrology
- MEAS101 - Introduction to Measurement Concepts
- MEAS102 - SI Units - The second
- MEAS103 - SI Units - The meter
- MEAS104 - SI Units - The kilogram
- MEAS105 - SI Units - The ampere
- MEAS106 - SI Units - The kelvin
- MEAS107 - SI Units - The mole
- MEAS108 - SI Units - The candela
- MEAS109 - Fundamental Constants in Metrology
- EE101 - Basic DC Circuit Theory
- EE102 - Basic AC Circuit Theory
- EE103 - Introduction to the decibel (dB)
- EE104 - Introduction to RF/Microwave concepts
- MEAS120 - Basic DC Measurements
- MEAS201 - Basic AC Measurements
- INST150 - Introduction to the Thermal Voltage Converter (Low Frequency)
- MEAS301 - Basic Time and Frequency Measurement
- INST400 - RF and Microwave Devices and Instrumentation
- MEAS150 - Introduction to Angular Measurement
- INST301 - Introduction to Linear Dimensional Measurement Instrumentation I
- MEAS280 - Introduction to Pressure Measurement
- MEAS140 - Introduction to Temperature Measurement
- INST350 - Introduction to the Platinum Resistance Thermometer
- INST351 - Introduction to the Thermocouple
II. Measurement Systems
- MEAS110 - Basic Measurement Concepts
- MEAS111 - Inspection, Measurement, and Test Equipment (IM&TE) specifications
III. Calibration Systems
- CLP100 - Introduction to Laboratory Standards
- CLP103 - Calibration Procedures
- CLP300 - Calibration Lab Personnel Roles and Responsibilities
- ESD101 - Introduction to ESD Protective Measures
IV. Measurement Uncertainty and Applied Math
- MATH50 - Applied Math for Calibration Technicians
- MATH51 - Applied Statistics for Calibration Technicians
- MATH110 - Introduction to Complex Arithmetic*
- UNC101 - Introduction to Uncertainty Concepts
- UNC102 - Basic Uncertainty Analysis.
- UNC103 - Intermediate Uncertainty Analysis
*Not actually part of the CCT BOK, but required for one of the courses that covers AC circuit theory.
V. Quality Systems and Standards
- QUAL103 - The ASQ Code of Ethics
- QUAL150 - Quality Control Tools I
- QUAL151 - QC Tools - Cause and Effect Diagrams
- QUAL152 - QC Tools - Flowcharts and Process Maps
- QUAL153 - QC Tools - Check Sheets
- QUAL154 - QC Tools - Histograms
- QUAL155 - QC Tools - Scatter Diagrams
- QUAL156 - QC Tools - Control Charts
- QUAL157 - QC Tools - Pareto Diagrams
- SAF000 - Basic Workplace Safety
- SAF100 - Hazard Communication
- SAF101 - Housekeeping
NOTE: There are still courses under development that cover other parts of the ASQ CCT Body of Knowledge. This program will be upgraded as each of these courses is brought online.
To register for this program, you must have a student account.
If you have a student account select "Register for Program" and if you do not have a student account select "Create Student Account" and return to this page to register for the program
or
Create Student Account