MEAS460 - Introduction to MIL-STD-461 CE Measurements

This course is the first in a four course series on MIL-STD-461 measurements. MIL-STD-461 concerns itself with four different types of measurements, conducted emissions (CE), radiated emissions (RE), conducted susceptibility (CS), and radiated susceptibility (RS). The courses in this series are thus naturally:

• MEAS460 - Introduction to MIL-STD-461 CE Measurements
• MEAS461 - Introduction to MIL-STD-461 RE Measurements
• MEAS462 - Introduction to MIL-STD-461 CS Measurements
• MEAS463 - Introduction to MIL-STD-461 RS Measurements

This course is concerned with conducted emissions measurements. Although this course is concerned about MIL-STD-461 measurements, the techniques used are applicable to commercial standards as well.

The course outline is as follows:

• Introduction
• The Standards
• Definitions
• General Requirements
  • Shielded Enclosures
  • Ground Planes
  • Safety Grounds
  • Input Power Leads
  • Test Equipment Calibration
  • Measurement Tolerances
  • Emission Measurement Bandwidths
• The LISN
• The Current Probe
• Detailed Requirements
  • CE101 - Conducted Emission, Power Leads, 30 Hz to 10 kHz
  • CE102 - Conducted Emission, Power Leads, 10 kHz to 20 MHz
  • CE106 - Conducted Emission, Antenna Terminal, 10 kHz to 40 GHz
• Presentation of Measurement Data
• Safety
• Summary

This course is intended for those with RF measurement background, and some basic familiarity with the topic of EMI/EMC measurements. This is covered in the prerequisite courses.

To register for this course, you must have a student account.

If you have a student account select "Register for Course" and if you do not have a student account select "Create Student Account" and return to this page to register for the course

or